-30-
Defect
Cause
Elimination
Saw blade jams as the machine is
advanced
Feed rate too fast
Reduce feed speed
Blunt saw blade
Release the switch immediately.
Remove the machine from the
workpiece and replace the saw
blade
Tension in the workpiece
Poor machine guidance
Use parallel stop
Uneven workpiece surface
Straighten the surface
Burn marks on the cut surfaces
The saw blade used is unsuitable
for the task or blunt
Replace saw blade
Chip ejection blocked
Wood is too damp
Extended
operation
without
extraction
Connect machine to an external
extraction, e.g. portable dust
extractor
Sudden smoke emission from the
motor casing
Overload of the machine’s
electronic system
Interrupt the power supply by
removing the battery pack. The
smoke emission stops.
Do not insert a rechargeable
battery! Avoid inhaling the
smoke!
