-18-
7
Troubleshooting
Danger
Determining the causes for existing defects and eliminating these always requires
increased attention and caution. Pull the mains plug beforehand!
Some of the most frequent defects and their causes are listed in the following chart. In case of other defects,
contact your dealer or the Mafell customer service.
Defect
Cause
Elimination
Machine cannot be switched on
No mains voltage
Check power supply
Carbon brushes worn
Take the machine to a MAFELL
customer service agency
Machine switches itself off when
idling or while cutting is in
progress
Mains failure
Check mains backup fuse
Unsatisfactory finish
Blunt knives
Reverse or replace knives
Uneven feed
Cut with constant pressure and
reduced feedrate
Chip ejection blocked
Wood is too damp
Extended
operation
without
extraction
Connect to an external extractor,
e.g. portable dust extractor
8
Optional accessories
-
Dust bag, cpl.
Ref. No. 033707
-
Reversible blades (1 pair)
Ref. No. 091696
-
Reversible blades (3 pairs)
Ref. No. 091697
9
Exploded drawing and spare parts list
The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com