![background image](http://html.mh-extra.com/html/mafell/k-65-18m-bl/k-65-18m-bl_operating-safety-instructions-manual_689044018.webp)
K65 18M bl/KSS60 18M bl
18
01/2022
6.
Turn the disconnected machine onto the motor
unit. The saw blade points upward.
7.
Insert the Allen key (B) into the flange screw
(13) and turn it
counterclockwise
until the saw
shaft locks into place.
➢
The saw blade is retained in position and
the flange screw can be released.
8.
Using the Allen key (B), turn the flange screw
(13)
counterclockwise
to loosen it.
9.
Remove the flange screw (13) and the front
clamping flange (14).
10.
Remove the old saw blade.
➢
Clamping flanges must be free of adhering
parts!
➢
The new saw blade can now be installed.
Fig. 10: Removing the old saw blade
11.
Position the new saw blade (15) on the rear
flange (17).
➢
Ensure that the direction of rotation is
correct when you install the saw blade.
The saw teeth or the arrow on the saw
blade (15) must point in the direction of the
arrow (16) on the machine.
12.
Fit clamping flange (14) and flange screw (13).
13.
Using the Allen key (B), turn the flange screw
(13)
clockwise
to tighten it.
➢
The saw blade is secured.
Fig. 11: Replacing the saw blade