-5-
Unpacking
The Maestro Pedicure Spa requires very little assembly. In order to minimize potential damage, it was
shipped with the chair portion attached to the main frame.
DO NOT REMOVE CHAIR FROM BASE PORTION
Remove and discard all packing and lifting materials.
Installation Instructions
EVERY MAESTRO PEDICURE SPA MUST BE INSTALLED BY A LICENSED PLUMBER AND A
LICENSED ELECTRICIAN. INSTALLATION MUST COMPLY WITH ALL NATIONAL, STATE AND
LOCAL BUILDING CODES AND/OR REGULATIONS. FAILURE TO COMPLY WITH THESE CODES
AND/OR REGULATIONS WILL RESULT IN THE LIMITED WARRANTY BEING NULL AND VOID.
Install to Permit Access for Servicing
In order to ensure access after installation, please refer to installation drawings available at
ContinuumFootspas.com.
Location and Securing to Floor
The Maestro Pedicure Spa must be located on a level floor that is capable of supporting both the
Pedicure Spa and a client.
Important
The Maestro Pedicure Spa
MUST
be anchored to the floor. There are two (2) supplied mounting brack-
ets.
Please note the following installation instructions:
Step 1
Utilizing a level, carefully adjust the eight (8) leveling feet. It is extremely important that the Pedicure
Spa is level. Four (4) leveling feet are beneath the basin and four (4) are beneath the main frame.
(Note: All leveling feet have been factory adjusted prior to shipment. In most cases no further adjust-
ment should be necessary).
Step 2
Mounting brackets are to be used only on the main frame leveling feet. Slotted portion of the mounting
bracket fits between frame and the leveling foot. The portion with the hole should be positioned to the
floor. Use appropriate hardware to secure to floor (not supplied).
MAESTRO
®
PEDICURE SPA
