Maestro MR807, Owner'S Manual

Page: 9 / 40

9
Cleaning and maintenance
ATTENTION!
- Never clean the device while it is connected to the mains.
- Before cleaning disconnect the device and wait for full stop of moving parts.
- Do not use abrasive and aggressive detergents, solvents, alkaline, metal objects and
wash-ups.
- Never submerge electric motor unit, its mains cable and plug in water or other liquid, do
not wash the motor unit in water or in a dish washing machine.
Disassembly method
1. Power off to stop the machine, and pull out the power plug.
2. Use hands to hold the feeding tube and rotate it in counter clockwise direction (see the
Picture 10 ); and pull out the feeding tube when it is rotated to the position indicated in the
figure.Hold the juice or mare outlet on the squeezing cup and take it out.
3. Take out the auger+washing rack assembly in the squeezing cup (see the Picture
11-12).
4. Pull out the rubber pad. (Picture 13). After cleaning do not forget install it properly
(Picture 14). Make the rubber pad of marc outlet inserted into the rectangular slot. Make
the rubber pad of marc outlet properly inserted.
5. Respectively disassemble the auger filter and washing rack for cleaning (Picture 15).
- Immediately after terminating the use wash all removable parts with warm soapy water
using soft nylon sponge, then rinse with clean water and wipe with dry and clean towel.
(Picture 16).
Рiс. 10
Рiс. 11
Рiс. 12
Рiс. 13
Рiс. 14