Maestro MR807, Owner'S Manual

Page: 6 / 40

6
5. Install the feeding tube. When it is installed downwards, the marking point on
feeding tube shall align with that on the squeezing cup. Make “mark” of feeding
tube rotate towards the “mark” on squeezing cup in clockwise direction and lock
(Picture 6).
6. See the figure. Make the two juice/marc cups put at the appropriate position: one is used
to receive juice, and another is used to receive marc (Picture 7).
Connect power plug to the mains.
Now your juicer is ready to work.
Instructions for use
Turn on the switch
(forward) (Picture 8).
Forward: Make fruits
and vegetables
pushed downwards for
squeezing.
Reverse: Fruits and
vegetables return
upwards. (Picture 9).
Notes: Please don’t
operate switch with wet
hands.
How to use feeding tube
Depends on the caliber of products you can load the fruit and vegetables through small or
big holes in the feeding tube.
Use method of cover
Push the button leftwards and the swiveling cover will bounce automatically. (Picture 9.1).
Press the swiveling cover downwards and then push the button rightwards to lock it.
(Picture 9.2).
Use method of big caliber feed- port for whole apple, pear, tomato (Picture 9.3).
Notes:
The fruits and vegetables with the diameter of over 75 mm or irregular shapes shall be put
into the machine after being cut into small size, so as to prevent unsmooth feeding.
Much fiber vegetable should be cut less 2cm length.
EN
Pic. 8 Рiс. 9
Рiс. 9.1 Рiс. 9.2 Рiс. 9.3 Рiс. 9.4