MAER IDROPULITRICI AVANT 120/11 Instructions For Installation And Use Manual Download Page 18

- 18 -

- 19 -

Congratulations!

By purchasing a MAER high pressure cleaner, you have purchased a high technology machine that will 

allow you to realize, for a long time, washing operations with care, versatility and safety. 

The customer and buyer must verify that the operators have read and know the content of the manual and 

that, therefore, attentively and meticulously follow all the indications.

The manufacturer doesn’t respond of the damages caused to things, people or animals or those suffered 

by the high pressure cleaner itself, if the conditions here clarified are not respected.

This manual is an integral part of the machine and must therefore preserved with care for all the life of the 

high pressure cleaner, up to its demolition.

The manufacturer reserves himself the right to the change, also without warning, of his/her own products, 

without varying, in the case in which the changes are marginal, the documents and the relative technical 

documentation.

1.  Field of employment

 

1.1.  The high pressure cleaner is exclusively destinated to the washing, by a jet of high pressure hot 

 

water,  of  objects  and  surfaces  available  to  substain  its  mechanical  and  thermal  action,  and,

 

eventually, the chemical action of the additive liquids, detergents and disinfectants, etc...; it allows

 

therefore the cleaning, the detersion, the disinfection, the sandblasting, the descaling, etc… using

 

accessories, of objects and of surfaces.

 

1.2. The destination of employment of the high pressure cleaner must meticulously been respected,

 

and every other employment must

 

be considered improper.

 

1.3. The nameplate of identification

 

(with  the  technical  characteristics

 

of  the  machine)  is  positioned  on

 

the  cart  and  it  is  always  present. 

 

Please  make  sure,  when  you

 

purchasethe high pressure cleaner,

 

that  the  machine  has  this

 

nameplate of identification. 

 

Otherwise,  advise  immediately

 

the  supplier.  Machines  without

 

nameplate  of  identification  have

 

to be considered anonymouss and

 

potentially dangerous; they mustn’t

 

be used, otherwise every responsibility of the manufacturer will decade.

2.  The characteristics of the personnel employed to use the high pressure cleaner

 

2.1. All those people that deal with the operation of the machine must dispose of a specific education 

 

 

or of an experience matured on high pressure cleaners.

 

2.2. To prevent damages to things, people or animals, we recommend to the clients to inform all the 

 

 

operators about the possible consequential risks caused by the installation and the use of the 

 

 

high pressure cleaner.

 

2.3. The  operator  of  the  machine  has  to  use  always  the  described  means  of  personal  protection,

 

 

according to the law of the country of destination and what is given to him/her by his/her employer

 

 

(safety shoes, work overalls, protective glasses, etc...).

 

2.4. The personnel employed to the installation, to the use or to the maintenance of the high pressure 

 

 

cleaner must be adult, experienced, mature and aware of his/her own suitable assignments and 

 

 

must  be  able  to  correctly  interpret  what  described  in  this  manual,  guaranteeing  correctness, 

 

 

safety, as well as scrupulousness in the controls.

ENGLISH LANGUAGE

INSTRUCTIONS MANUAL

INSTRUCTION FOR INSTALLATION AND USE

Summary of Contents for AVANT 120/11

















































Reviews: