Maeda CC1485S-1, Operation Manuals

Page: 347 / 370

339
18. Align the hole of the No. 1 Fly-jib (2) connection with the hole of the Fly-jib stowage bracket A (21).
19. Insert the position pin (A2) into the bracket (27) on the left
side of the Main boom tip. At this time, be sure to turn
over the ring of the linchpin to lock securely.
NOTES
The position pin (A1) will be used later for fixing the Fly-jib.
20. When the hole of the No. 1 Fly-jib (2) connection is
aligned with the hole of the Fly-jib stowage bracket A (21),
insert the position pin (B2) into the hole and insert the
linchpin. At this time, be sure to turn over the ring to lock
securely.
• Do not remove the position pins (C1, C2) from the bracket (26) until the position pin (B2) is
securely inserted into the stowage bracket A (21) hole and the Fly-jib is fixed. This could cause
a serious accident.
• Be sure to insert the position pin (B2) in a downward direction from the above. If they are
inserted in a upward direction from the lower part, the position pins could fall off and the
Fly-jib could drop, causing a serious accident.
CAUTION
Do not perform extension and retraction operation of the main boom when the position
pins (B2, C1, C2) are inserted into both holes of the bracket (26) on the right side of the
main boom tip and the Fly-jib bracket A (21). This can cause major damage to the Fly-jib or
main boom.
21. Remove the linchpins of the position pins (C1, C2)
installed in the bracket (26) hole on the right side of the
main boom tip and pull out the position pins (C1, C2).
22. Slide the No. 1 Fly-jib (2) sideways to move it away from
the bracket (26) on the right side of the Main boom tip.