4 |
P a g e
3.
Pivot Screws
The MadStad mount has a pivot screw on each set of brackets, located near the middle of brackets. A nylon
lock nut keeps the screw in place, yet allows the brackets to slide back and forth. It is adjusted at the factory to
have a minimum of play yet still allow the brackets to move. If for some reason you wish to adjust the
tightness of this pivot screw, use a 4mm Allen wrench along with a 10mm socket or open-end wrench to make
the adjustment. If you tighten the lock nut completely you will not be able to slide the brackets.
