Safety Instructions And Warranty
Two years of warranty are granted to the purchaser of this product.
Warranty applies to constructional fault, material defect, or incorrect
assembly the manufacturer has caused or is to be held responsible for.
Warranty will be void if the interface is opened, modified, damaged through
inappropriate handling and wrong usage, damaged through electric current or
damaged through any other cause.
Please follow the instructions to avoid mishandling, damage to the device, or
personal damage:
It is recommended to always use an opto-isolator/opto-coupler splitter. Avoid
voltage on the DMX lines/cables at all times. Do not remove any parts from
the unit including the plug ground pin or connect to an ungrounded circuit.
Beware that the interface works with electrical power. Only use the device in
dry environments (indoor use). Do not use the interface in humid
environments and avoid contact with water or any other liquids. Turn off the
power if you are not using the device for a long time.
There are no user serviceable parts inside the interface. Repair service lies
only within the responsibilities of the manufacturer. If the interface appears
to be defective, please contact your dealer. After expiration of the warranty
period, you may contact your supplier or the manufacturer to have the unit
repaired against payment of an individual service fee.
The interface has two ports. Only connect devices, cables, and connectors to
the USB port and XLR plug using connectors of the same type as the port. Do
not use inapplicable equipment.
This device should be operated by professionals. The device is not designed to
be used by non-professionals or children.
End-Of-Life
This electrical device needs to be disposed of properly. Do not throw
the device into normal trash when the end-of-life has been reached.
Please recycle packing material whenever possible.
Summary of Contents for NEO
Page 1: ......
