MADRIX LUNA, Quick Start Manual

Page: 6 / 28

5
EN
Power Supply
Be careful when handling the device and electrical power! To supply the unit with
power, first connect the provided power cable to the unit (‘Power’) and then
to a suitable power outlet. The device uses mains voltage (AC 100 V – 240 V)!
CAUTION!
DO NOT OPEN THE UNIT. RISK OF ELECTRICAL SHOCK.
Description Of Status LED Codes
The following tables describe the LED status codes on the front of the device.
STATUS STATUS LED POWER
Powered off
Power cable not connected.  The device has no power.
Permanently green
Connected to power.

The power is on.
Blinking green Bootloader activated.

Reset the device (see page 7).
STATUS STATUS LED ETHERNET STATUS LED USB
Powered off
Ethernet not connected
or the device has no power. USB not connected
or the device has no power.
Permanently green
Connected to Ethernet.

No data is sent or
received over Ethernet.
Connected to USB.

No data is sent or
received over USB.
Blinking green
Communicating over
Ethernet.

Sending or receiving data
over Ethernet.
Communicating over
USB.

Sending or receiving data
over USB.
STATUS STATUS LED DMX-IN STATUS LED DMX-OUT
Powered off
DMX not connected
or the device has no power. DMX not connected
or the device has no power.
Blinking green
Receiving data via DMX-IN.

The input port works.
Sending data to DMX-OUT.

The output ports work.