MADRIX LUNA 4, User Manual

Page: 75 / 115

[Part 3] MADRIX 5 Software
//75
www.madrix.com
MADRIX LUNA User Manual
§
First, select your device in the list.
§
Activate Mapping
§
This feature maps incoming data to the specified DMX universe and channels.
§
Configure the following settings in the section Mapping
- Map Channels From - Defines which incoming channels are used. This is the start channel to specify the
range of channels.
- To - Defines which incoming channels are used. This is the end channel to specify the range of channels.
- To Universe - Defines onto which output DMX universe MADRIX 5 should map the specified range of
incoming channels.
- Start At Channel - Defines the first DMX channel of the output DMX universe MADRIX 5 should use.
- Use HTP - Activates the Highest Takes Precedence feature. You can map incoming data to a DMX address
range that MADRIX 5 already controls. Use HTP and MADRIX 5 will compare incoming values with the DMX data
it sends to the DMX output. As a result, MADRIX 5 will only use the highest of both values on a particular channel
and send it to the output.
§
Click Apply to confirm.
Remote Control
§
Use Remote Control, if you want to control the MADRIX 5 Software remotely