MADRIX LUNA 4, User Manual

Page: 32 / 115

[Part 3] MADRIX 5 Software
//32
www.madrix.com
MADRIX LUNA User Manual
Status Indicators [ArtAddress]
In order to use these features, Enable ArtAddress first.
§
Regarding sending ArtAddress commands to nodes, make sure that your nodes fully support this Art-Net feature.
You will also get notified by a message box. Confirm the message with OK or abort via Cancel .
§
MADRIX LUNA, MADRIX NEBULA, MADRIX PLEXUS, MADRIX STELLA, MADRIX ORION, and MADRIX AURA support
ArtAddress.
§
MADRIX 5 itself can receive ArtAddress commands.
Mute Status Indicators - Switches off and disables all built-in status indicators of
a device over Art-Net [ArtAddress > AcLedMute].
Operate Status Indicators Normally - Allows the built-in status indicators of a
device to operate normally again, after having them switched off [ArtAddress >
AcLedNormal].
Highlight Device - Activates the highlight mode [ArtAddress > AcLedLocate].
Select one or more interfaces and click the button. The corresponding status indicators
of the selected interfaces will flash for a better identification or tests. This makes it
easier to see them on site/stage. It considerably speeds up the procedure of
programming or testing the selected interfaces.
In addition to sending out commands to nodes, MADRIX 5 itself can receive ArtAddress
commands.
Receive - Activates that MADRIX 5 is able to receive ArtAddress commands. It is
enabled by default.
§
AcLedMute and AcLedNormal will disable the identification of MADRIX 5.
§
AcLedLocate will enable the identification of MADRIX 5.
- As long as Identify is enabled or set via protocol commands, the MADRIX 5 user
interface [GUI] will repeatedly change every second from the currently selected
theme to the opposite theme, either from dark to light or vice versa.