
▲
Do not look into the inside of this unit through vents (ventilation holes), etc. Do not
look at the illumination lamp directly by opening the cabinet while the illumination
lamp is turned on. The illumination lamp also contains ultraviolet rays and the light
is so powerful that your eyesight can be impaired.
▲
Xenon gas is enclosed with high pressure inside the light-source lamp (lamp unit) of
this projector. If you drop, or impart a shock to the lamp, or discard it as is, there is the
possibility of explosion, leading to personal injury. Use special care when handling the
lamp. For any unclear points, consult your product dealer.
▲
Use only the accessory cord designed for this product to prevent shock.
The power supply voltage rating of this product is AC 120 V, the power cord attached
conforms to the following power supply voltage. Use only the power cord designated by
our dealer to ensure Safety and EMC.
When it is used by other power supply voltage, power cable must be changed.
Consult your Madrigal Imaging dealer.
* DO NOT allow any unqualified person to install the unit. Be sure to ask your dealer
to install the unit (eg. attaching it to the ceiling) since special technical knowledge
and skills are required for installation. If installation is performed by an unqualified
person, it may cause personal injury or electrical shock.
5
Power Supply Voltage AC 120 V
Power Cord