Controls and Features
(Continued)
Front Side, Top Surface,
Right Side
(Cont.)
Remote sensor
Receives the IR directly from your remote control or reflected from your screen.
Left-hand Side
AC IN (power input) terminal
This is the power input terminal where the supplied power cord is connected.
MAIN POWER switch
This is the main power switch. When it is turned on, the projector goes into stand-by
state, and the STAND BY indicator on the control panel comes on.
ON
[I ]: The main power turns on.
OFF
[O]: The main power turns off.
Connector panel
For details, refer to “Connector Panel” on page 14.
Adjustable foot (for horizontal angle adjustment)
It is set at the shortest position when shipped from the factory. Turn the foot to make
the projector level. Adjustment can be made in the range of + 1.5° and – 1.5° from
the horizontal position.
10
11
10
9
8
+1.5
°
–1.5
°
Extend Shorten