Connecting to Various Devices
• Before connection, be sure to turn off the projector and connected devices.
• Read the manual which comes with each device thoroughly.
Connecting To Video
Devices
Before connection, be sure to turn off both the projector and video device.
To select the proper audio input for video input:
The video input can be switched with the VIDEO button on the remote control.
MEMO
• When a signal with much jitter is reproduced on a VCR or special-effect playback is
performed, the upper part of the picture or the picture itself may be erased or distorted.
Connecting To
High-Definition Devices
Before connection, be sure to turn off both the projector and
Hi-Definition device.
Memo
• Devices with component signal output terminals (DVD player (NTSC), etc.) can be
connected. (*DVD: Digital Video Disc)
• DTV-format signals (480i, 480p,720p,1080i) can be input.
To select the proper audio input for video input
The video input terminal (AV IN input terminal) can be switched with the VIDEO button.
However, since this projector has only a single audio input terminal, reconnect audio
input in accordance with the AV device to be used.
22
Y
AUDIO
AUDIO OUT
REMOTE
Y/
C
VIDEO
Y
P
B
/B-
Y
P
R
/R-Y
L
R
RS-232C
S Video cable
(separately available)
To Y/C
BNC-RCA conversion plug (accessor y)
To VIDEO
AV
connection
cable
(accessor y)
Video devices
VCR
Laser disc player
Camcorder