![background image](http://html1.mh-extra.com/html/madrigal-audio/mark-levinson-36/mark-levinson-36_operating-manual_3348686019.webp)
19
and High Definition Compatible Digital® are registered trademarks of Pacific Microsonics, Inc.
l e f t a n a l o g o u t p u t s
PUSH
PUSH
r i g h t a n a l o g o u t p u t s
1
aes/ebu
2
aes/ebu
external
i.r.
master
communication
port
DIGITAL PROCESSOR Nº36
d e s i g n e d a n d m a n u f a c t u r e d i n U . S . A .
b y
MADRIGAL S/N
2
1
3
6
eiaj
5
spdif
4
spdif
3
st
digital output
4
5
6
7
8
9
10
1
2
Rear panel, Nº36
1
BALANCED ANALOG OUTPUTS
These outputs provide balanced line-level analog audio (via cables
equipped with XLR-type connectors) to a preamplifier, integrated amplifier,
or receiver equipped with balanced inputs (see “Set-up and installation”).
The pin assignments used are AES-standard, as shown below:
1 2
3
Pin 1: Signal ground
Pin 2: Signal
+
(non-inverting)
Pin 3: Signal
–
(inverting)
Connector ground lug: chassis ground
2
SINGLE-ENDED ANALOG OUTPUTS
These outputs provide single-ended line-level analog audio (via cables
equipped with RCA-type connectors) to a preamplifier, integrated amplifier,
or receiver.
3
AES/EBU ELECTRICAL DIGITAL INPUTS (#1 & #2)
These inputs accept the
digital audio signal
(
DAS)
via cables equipped
with XLR-type connectors from digital sources such as a compact disc
transport, laser disc transport, digital audio tape transport, digital broadcast
receiver.
These inputs conform to the AES/EBU digital interconnection standard,
which calls for a 110
Ω
transmission of the DAS. Use a digital interconnecting
cable specifically designed for the 110
Ω
AES/EBU standard, such as Madrigal
MDC-1 cable, when using these inputs. The pin assignments for the AES/
EBU digital interconnection standard are shown below.
PUSH
2
1
3
Pin 1: chassis ground
Pin 2: non-inverted digital
Pin 3: inverted digital
Connector ground lug: chassis ground