![background image](http://html1.mh-extra.com/html/madrigal-audio/mark-levinson-36/mark-levinson-36_operating-manual_3348686016.webp)
16
9
STANDBY & STANDBY LED
Pressing this button takes the Nº36 out of “standby” mode (provided the
Nº36 is connected to AC power), making it fully operational.
Pressing
standby
again places the Nº36 into standby mode, which turns the
display
off, turns off all outputs (including the record outputs), and disables
the front-panel controls. The internal circuitry remains powered up in order
to maintain its thermal stability and optimum performance at all times.
While the Nº36 is in standby, the LED above the
standby
button flashes ap-
proximately every five seconds. (When the Nº36 is Linked to other Mark
Levinson components, all the standby lights will blink in unison.) When the
Nº36 is ready to operate (that is, when it is not in standby mode), this LED
remains lit continuously.