Madman EMS-3 Operating Manual
Page 11
High Alarm:
Enter the pressure threshold for when the high alarm must be activated. Any pressure above this value will activate the
alarm.
High Caution:
Enter the pressure value for the high caution. This is the lower value of the upper yellow band.
Low Caution:
Enter the pressure value for the low caution. This is the upper value of the lower yellow band.
Low Alarm:
This enables or disables the pressure low alarm.
Low Alarm:
Enter the pressure threshold for when the low alarm must be activated. Any pressure below this value will activate the
alarm.
Alarm:
Select which output the alarm must activate.
4.3.2 Temperature Setup
Mode:
Select the function for the analog channel. Options are “PRESSURE”, “TEMP” or “OFF”.
Sender:
Select what type of sender you are using. Select
“VDO 120”
for a VDO 120 degree sender,
“VDO 150”
for a VDO 150
degree sender,
“ECHLIN”
for a ECHLIN TS920SA sender,
“LM335”
for the precision temperature sender or
“USER”
for a
custom sender.
If the sender type is set to
“USER"
CALIBRATE SENDER:
If the sender type is set to “
USER”
, then use this menu option to calibrate your pressure sender. See section 4.3.3 for
more information.
