Madge Networks CrossFire 8300, Manual To Operation

Page: 26 / 68

16
CrossFire 8300/8301 Stacker Guide to Operation, DOC-7092 v. 1.0 3. Preparing for Installation
➽
➽ ➽
➽
Warning: A voltage mismatch can cause equipment damage and may pose a fire
hazard. If the voltage indicated on the label is different from the power outlet
voltage,
do not connect the chassis to that receptacle .
Package Contents
Immediately after receiving the equipment, examine all shipping containers and
contents for damage. If any damage has occurred, notify the shipping carrier.
Unpack the unit by removing the packing material and lifting it from its protective
enclosures. Visually examine the equipment and check the container for related
parts and accessories. You should have the following items:
•
One CrossFire 8300 Switch Stacker with one CrossFire 8301 Redundant
Stacker Unit installed
•
One CrossFire 8300 Switch Stacker/CrossFire 8301 Redundant Stacker Unit—
Guide to Operation
•
One CD-ROM containing the switch software as well as user documentation
in PDF format
Report any missing parts and any damage not related to shipping to your customer
service representative.
➽ ➽ ➽ ➽
Note: Keep the packing materials for future use. All components returned under
warranty should be shipped in their original packing materials .
If you have received your equipment before your site is fully prepared, after
inspection, you should keep all of the components in the original shipping
containers and store them in a physically and environmentally safe place.
When you are ready to begin the installation, please refer to Chapter 4,
“Installation” , for important instructions and directions.
❏