![background image](http://html1.mh-extra.com/html/mader/carden-tools-gbd-601c/carden-tools-gbd-601c_manual_3322482069.webp)
19
8.4.R
EPLACE
T
HE
B
LADES
Sharpen or replace the blades as soon as the chipping performance begins to deteriorate, or if
you notice dings, chips or cracks.
To perform this procedure:
1.
Turn off the machine, allow all moving parts to come to a complete stop, and disconnect
the spark plug wire!
2.
Remove the side cover plate to expose the blades. (The side cover plate is inserted to
upper, so just pull down.)
3.
Remove one blade, rotate the impeller, and remove the second blade.
4.
Have the original blades professionally sharpened, or order a replacement set, then re-
install the blades.
5.
Replace the side cover plate and re-attached the spark plug wire.
8.5.R
EPLACE
T
HE
V-B
ELT
Replace or tighten the V-belt you notice the motor running and the chipper blades are not
spinning.
1.
Turn off the machine, allow all moving parts to come to a complete stop, and disconnect
the spark plug wire!
2.
Remove the V-belt cover as shown in Pic. 25.
3.
Roll the belt off from the pulleys and install the new belt.
4.
Replace the V-belt cover and re-attached the spark plug wire.