Troubleshooting Guide
Innowalk 2.gen
Document code:
T36
Made by:
FGB
Date:
25.03.21
Revision:
A
Approved by:
AL/KU
Date
:
25.03.21
Page:
8 of 12 pages
Ski loose from drive unit arms
15
The ski should be tight relative
to the rear module.
Open the round side cover by unscrewing the screws. Tighten the nut
holding the skis with a 22mm wrench:
On the left side: It is a left-handed thread on the left side, turn counter-
clockwise to tighten.
On the right side: Normal threads on this side. Turn clockwise to tighten.
Contact
service
personnel
Walking function stops when
applying load
16
Spasm control
NEVER adjust the spasm control without the proper technical and
therapeutistic insight and NEVER without training. Only representatives
approved by Made for Movement are allowed to adjust the spasm control,
as errorous use/adjustment here can injure the user.
Contact
service
personnel.
The service
personnel will
assess if the
error is
caused by
hardware
error or
errorous
adjustment,
and initiate
proper
actions to
address the
issue. Do NOT
use the
Innowalk
again until it
has been
examined by
service
personnel.