Troubleshooting Guide
Innowalk 2.gen
Document code:
T36
Made by:
FGB
Date:
25.03.21
Revision:
A
Approved by:
AL/KU
Date
:
25.03.21
Page:
5 of 12 pages
harness inside
covers.
Seat tilt actuator does not
respond
9
Homing / calibration of the actuator
Press and hold
“standing up” and “sitting down” buttons on the remote
-
control to execute the homing sequence. Important to hold 5 seconds
after the actuator stops moving to finalize the sequence
Contact
service
personnel to
replace
actuator or
electronic
box.
Seat height actuator does
not respond
10
Homing / calibration of the actuator
Press and hold “seat height lift” and “seat height lowering” buttons on
the remote-control to execute the homing sequence. Important to hold
5 seconds after the actuator stops moving to finalize the sequence
Contact
service
personnel to
replace
actuator or
electronic
box.