10
3 Use
The fully operational phase involves remote
meter reading via the radio modules. Each
radio module transmits the reading with a
settable frequency (default: reading trans-
mitted every 16 seconds). Simply approach
the meter with a suitable receiver or, if
there is a fixed reading system, the data will
be collected automatically.
l
WARNING!
Reading of data can be per-
formed using various software.
Please consult the metering oper-
ator for more information on the
specific use of reading software.
3.1 Synchronisation of
mechanical reading
The radio module stores the volume record-
ed via a pulse inlet. The module is factory
set with an initial volume of zero.
If the meter on which the radio module
is installed has a reading other than zero,
synchronisation of the mechanical meter
reading and radio module is recommended
using the programming kit. Simply read the
value in litres on the meter and set the read-
ing using the programming software.
3.2 Activating the radio module
The
Arrow
EVO
Standalone module is deacti-
vated by default, therefore it will not trans-
mit nor count.
To activate the module: insert the red acti-
vation key (1) in the appropriate slot (2) and
keep it there for over 10 seconds.
If the key is inserted for less than 10 sec-
onds, the module is NOT activated.
2
1
l
WARNING!
For a complete list of program-
ming parameters and relative
settings, refer to the specific
manual.
d
PROHIBITED
Programming of the
Arrow
EVO
Standalone module without ap-
proval of the metering operator
is not permitted.
