Note:
If no buttons are pressed for forty-five (45) seconds the DVD 2 will
enter power save mode. When a button is pressed in power save mode the
controller will exit power save mode and execute the command of the
button pressed.
Note:
If the batteries are removed from the Universal Remote the TV and VCR
codes are reset to default. TV default is Sony (U,U) VCR default (TRI,U)
CONTROL MODES
The Mad Catz DVD 2 for the PlayStation 2 has three modes that will allow total
control over your PlayStation 2, TV, and VCR. You change modes by pressing
the Mode Button. The color of the mode LED indicates which mode you are in:
PlayStation 2/DVD Mode
-
GREEN
To switch to PlayStation 2 (DVD) mode, press the PS2 button on the DVD 2.
The Mad Catz DVD 2 is the best way to control for your PlayStation 2’s DVD
functionality. As an added feature the Mad Catz DVD 2 will also function as a
standard PlayStation 2 controller. The Mad Catz DVD 2 completely satisfies your
entertainment needs in one convenient package.
TV Mode
-
RED
Switch to TV mode by pressing the TV button on the DVD 2.
Programming the TV mode
TV mode on the Mad Catz DVD 2 is the ideal way to control your TV viewing
needs. By following the steps below you will be one step closer to comfort and
satisfaction.
1. Push the TV button to switch to TV mode.
2. Locate your TV brand on the TV Code List.
3. Hold down both Rewind symbol and Chapter Back. If done correctly the mode
LED will light GREEN.
4. While continuing to hold down both Rewind symbol and Chapter Back enter the
commands for your TV. Do not enter the commands at the same time, make sure
to enter them one a one at a time.
Example: Press and hold the Rewind symbol and Chapter Back buttons at the same
time (the MODE LED will flash in Green)
Press then release Triangle button (the MODE LED will flash in Red).
Press then release UP button (the MODE LED will flash in Amber, then go out).
5. If the first code you try does not work, try the others listed under your TV brand
until the Universal Remote operates your TV properly.
VCR Mode
-
AMBER
Switch to VCR mode by pressing the VCR button on the DVD 2.
Programming the VCR mode
VCR mode on the Mad Catz DVD 2 is the final step for total control. Program your
VCR by following the steps below and you will now have all your brand on the
VCR Code List.
1. Push the VCR button to switch to VCR mode.
2. Locate your VCR brand on he VCR Code List.
3. Hold down both Rewind symbol and Chapter Back. If done correctly the mode
LED will light GREEN.
4. While continuing to hold down both Rewind symbol and Chapter Back enter the
commands for your VCR. Do not enter the commands at the same time, make sure
to enter them one a one at a time.
Example: Press and hold the Rewind symbol and Chapter Back buttons at the same
times (the MODE LED will flash in Green)
Press then release Triangle button (MODE LED will flash in Red).
Press then release UP button (the MODE LED will flash in Amber, then go out).
5. If the first code does not work, try the others listed under your
VCR brand until the Universal Remote operates your VCR properly.
CAUTIONS
• DO NOT plug the infrared receiver into the game console while the power is ON.
• Precautions should be taken to prevent electrical shock.
• For indoor use only.
• Do not submerge in water.
• Not intended for children under 8 years.
ENGLISH
ENGLISH
