3
WOW! MANY PADS! SO CONNECTING!
DC IN:
Connects directly to the DC Jack. This is only used when you are soldering the indicator LED
to the 3PDT board.
DC OUT:
When using the DC IN pads, the DC OUT is used to connect power to the effect PCB.
INPUT/OUTPUT JACK (SIDES):
For builds that do not have top-mounted jacks. These connect
directly to their respective jacks.
GROUND:
To connect ground between the 3PDT board and your effect PCB. Note: you only need
one ground connection between the boards so if you are using the DC OUT connection, you do not
need to connect the GROUND pad to the effect PCB.
LED CATHODE (-):
Used for MBP style boards that have the indicator LED mounted on the effect
PCB. This pad connects the 3PDT ground to the LED cathode to illuminate the LED when the effect
is turned on.
EFFECT INPUT/OUTPUT:
To connect the switch to the circuit input and output (always used).
INPUT/OUTPUT JACK (TOP):
Used for MBP style boards that have top mounted switches (for
example, on many of the 125B and 1590BB builds).
CLR:
Used for a current limiting resistor on the LED. This is only used when mounting an LED to the
3PDT board. It is not needed when you are using an LED mounted to the effect PCB