background image

 

8

SENSOR POISONS 
The gas-sensing tip in the detector is designed with extreme sensitivity to the environment. As a result, the 
sensing function of the tip may deteriorate if it is exposed to a direct spray from aerosols such as paints, 

silicone vapors, etc., or to a high density of corrosive gases (such as hydrogen sulfide, sulfur dioxide) for an 
extended period of time. 
LIMITED WARRANTY 
The Macurco HD-11 Combustible Gas Detector is warranted to be free from defective material and 

workmanship for a period of two (2) years from the date of manufacture (stamped on the unit). If any 
component becomes defective during the warranty period, it will be replaced or repaired free of charge, if the 

unit is returned in accordance with the instructions below. This warranty does not apply to units that have been 
altered or had repair attempted, or that have been subjected to abuse, accidental or otherwise. The above 

warranty is in lieu of all other express warranties, obligations or liabilities. THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE LIMITED TO A PERIOD OF TWO 

(2) YEARS. Macurco shall not be liable for any incidental or consequential damages for breach of this or any 
other warranty express or implied arising out of or related to the use of said equipment. Manufacturer or its 

agent’s liability shall be limited to replacement or repair as set forth above. Buyer’s sole and exclusive remedies 
are return of the goods and repayment of the price, or repair and replacement of non-conforming goods or 

parts. 
 

Manufactured by Aerionics, Inc.  
Round Rock, Texas 

Email: [email protected] 
Phone: 1-877-367-7891 

Rev 5.14.2012 

© Aerionics 2012. All rights reserved.  
Macurco is a trademark of Aerionics, Inc. 

 

 

 

Summary of Contents for HD-11









Reviews: