Macurco CX-xx Manual (Rev-1.0) Eng
REV – 1.0
[34-2900-0512-0 ]
24
|
P a g e
To select the Power Up Test Configuration, in normal mode:
1.
Push the
Next
button to get to “Con” or the Configuration menu.
2.
Push the
Enter
button to enter the Con menu.
3.
Push
Next
1 time to get to “PUt” or Power Up Test Configuration.
4.
Push
Enter
. The display will show the current setting.
5.
Push
Next
to cycle through the available settings (display will begin flashing).
6.
Push
Enter
to confirm the new setting (display will stop flashing).
7.
Push
Enter
once more to return to the configuration menu.
8.
Push
Next
until “End” is displayed.
9.
Push
Enter
to return to normal operation.
4.5.4
Select Display Configuration – “dSP”
Available options are “On” (default), “OFF”.
To select the Display Configuration, in normal mode:
1.
Push the
Next
button to get to “Con” or the Configuration menu.
2.
Push the
Enter
button to enter the Con menu.
3.
Push
Next
2 times to get to “dSP” or Display Configuration.
4.
Push
Enter
. The display will show the current setting.
5.
Push
Next
to cycle through the available settings (display will begin flashing).
6.
Push
Enter
to confirm the new setting (display will stop flashing).
7.
Push
Enter
once more to return to the configuration menu.
8.
Push
Next
until “End” is displayed.
9.
Push
Enter
to return to normal operation.
4.5.5
Select Buzzer Configuration – “bUZ”
Available options are “On” (default), “OFF”.
To select the Buzzer Configuration, in normal mode:
1.
Push the
Next
button to get to “Con” or the Configuration menu.
2.
Push the
Enter
button to enter the Con menu.
3.
Push
Next
3 times to get to “bUZ” or Buzzer setting.
4.
Push
Enter
. The display will show the current setting.
5.
Push
Next
to cycle through the available settings (display will begin flashing).
6.
Push
Enter
to confirm the new setting (display will stop flashing).
7.
Push
Enter
once more to return to the configuration menu.
8.
Push
Next
until “End” is displayed.
9.
Push
Enter
to return to normal operation.
4.5.6
Select Alarm Relay Setting for CO – “ArS.C”
Available options are “diS”, 50, 100, 150, 200 (default).
To select the Alarm Relay Setting for CO, in normal mode:
1.
Push the
Next
button to get to “Con” or the Configuration menu.
Summary of Contents for CX-6
