PM100 Bump Test and Calibration Station
REV – 1.0
[34-2900-0513-2 ]
20
|
P a g e
5.3.4
Time Tab
The Bump-Calibration Station adds time data to all its logs. If the Bump-Calibration Station time is incorrect, it can
easily be updated to the correct time using the Bump-Calibration Station Manager software. The time can only be
set when connected using the PM Link.
5.3.4.1
Station Time Set
NOTE:
If the Docking Time Auto Sync option is checked in Station Info, the option to manually set the Bump-
Calibration Station time will not be available.
To manually set the Bump-Calibration Station time,
1.
Update the date field to the desired time. Click
CURRENT TIME
to set the date field to the current computer
time.
2.
Click
DATE/TIME UPDATE
. The software will set the Bump-Calibration Station time to the time displayed in
the date field.
Summary of Contents for AimSafety PM 100
Page 2: ......
