PM100 Bump Test and Calibration Station
REV – 1.0
[34-2900-0513-2 ]
19
|
P a g e
5.3.3.2
Save Logs to Computer
The log files can be saved to the computer.
To save the log files to the computer,
1.
Select the desired log files to save. Click the
Select All
check box to select or deselect all log files at once.
Individual log files can be selected by clicking on their respective check box.
2.
Click
Local Save
.
3.
A Browse window will open.
Navigate
to the desired save location. If saving many log files, it may be
advisable to create a folder for the log files.
4.
Press
OK
. The download will start.
5.
When the download is complete, a “Log data save success” message will pop-up.
5.3.3.3
Log Information
The log files are saved in a .csv file format. They can be opened by any spreadsheet software.
Each time a test is performed, a log similar to the image below will be created in the Bump-Calibration Station log
file.
Each PM
R
100
R
monitor that is tested using the Bump-Calibration Station will generate its own log file. The image below
shows the information in a sample log file with two test entries.
Summary of Contents for AimSafety PM 100
Page 2: ......
