Macrom MDVD5551R, Instruction Manual

Page: 35 / 57

30
System setup System setup
In any mode, touch the left top corner of the screen or press the [MENU/SRC] key
on the front panel to open the main MENU. Press the [SETUP] and then press
[SYSTEM SETUP] on the UI or press the [SYS SETUP] on the remote controller
to open the SYSTEM SETUP menu.
SYSTEM SETUP includes ASP CONFIG, GENERAL SETUP and SCREEN CAL.
Parameter adjustment procedures
① Select one option
Press the [ ◁ ]/ [ ▷ ] key on the front panel or the [ ]/ [ ] key on the remote
controller and then press the [ENTER] key on the front panel or the [ ]key on
the remote controller to confirm or touch the desired option.
② Adjust the value
Press the [ ]/ [ ] key on the front panel or the [ ]/ [ ] key on the
remote controller.
③ Save the change
Press the [ENTER] key on the front panel or the [ ] key on the remote controller
to confirm.
ASP CONFIG
Parameter adjustment procedures
ASP CONFIG
Option
Selectable values Selectable values Function Function
Bass Center
Frequency
Treble Center
Frequency
SUB.W Filter
SUB.W Phase
Bass Q-Factor
60Hz/ 80Hz/ 100Hz/
130Hz/ 150Hz/ 200 Hz
10KHz/12.5KHz/
15KHz/ 17KHz
80Hz/120Hz/160Hz
0D/ 180D
1.0/ 1.25/ 1.5/ 2.0
According to audio source discs,
select the Bass center frequency
to get the best Bass effect.
Set a cut-off frequency of the
subwoofer's L.P.F (low pass filter).
Set an output phase of the
subwoofer's L.P.F (low pass filter).
Change the sharpness of the
Bass output.
The larger the Q-Factor,
the sharper the Bass.
According to audio source discs,
select the Treble center frequency
to get the best Treble effect.
Note : Note :
All adjustments can be done by touch screen function also. All adjustments can be done by touch screen function also.