16
Three Modes Of Operation
Your DigitalDoc5 has three basic modes, Set-Up Mode, Normal
Operating Mode, and Scan Mode.
Set-Up Mode
Set-Up Mode can be reached any time by pressing the
Set Button
. Since
we've already covered Set-Up Mode, we'll refer you back to Chapter 3,
Setting Up Your DigitalDoc5
Normal Operating Mode
Normal Operating Mode is the mode you will use most often and also the
mode the DigitalDoc5 reverts back to from Set-Up and Scan Modes.
During normal operation your DigitalDoc5 displays what fans are currently
running (1-4) and the current Voltage readings (1-5). In Normal Operating
Mode the DigitalDoc5 scans each Temperature Sensor (Channel) and
displays it for 5 seconds, completing a cycle every 40 seconds. If you
press the
Up
or
Down Buttons
the DigitalDoc5 will display the next
Temperature Setting value. As it cycles through all 8 Temperature
Sensors (Channels), the Fan Rotation (1-8) status icon will spin if the
corresponding fan is currently running.
Scan Mode
Scan Mode
Fig. 3
is reached by pressing the
Scan Button
on your
DigitalDoc5.
Tip
:
While in Normal
Operating Mode, pressing
the Up or Down Button
will quickly take you to
and display the next
Channel.
Note
:
A "Channel" refers
to both the Current
Temperature Sensor and
also its' corresponding
fan. For Example, in
Fig.
1,
it is currently displaying
Channel 4 (CH 4) and the
number 4 Temperature
Sensor's reading is 26.3
degrees Celsius.. It is also
showing the current status
of Fan number 4 (1-8).
