15
Button Functions
The DigitalDoc5 has 5 buttons and a reset pin hole. Outlined below are all
the buttons functions.
2-1
Up Button:
In Normal Operating Mode the
Up Button
is used to
change the current Temperature Sensor (Channel). In Set-Up Mode the
Up button
will change the Temperature Set-Points and Voltage
Tolerance settings, as well as, let you choose different options.
2-2
Down Button:
Same as Up only Down.
2-3
Set Button:
While in Normal Operating Mode, press the
Set Button
to get into Set-Up Mode. In Set-Up Mode each time the button is pressed
it goes to the next function. When the final function is reached, the system
will save the values, or if you do nothing, as mentioned earlier, for 5
seconds, the system will automatically exit Set-Up Mode, saving the
values at that time.
2-4
Force Button:
This will force override your Temperature Set-Points
and automatically turn all your fans on. If pressed again it will return you
to Normal Operating Mode.
2-5
Reset Button:
This will set all the settings back to the default factory
values.
2-6
Scan Button:
Used for entering Scan Mode; depends on the
indicated sensor channel and each fan speed. If you're in Set-Up Mode,
this button is used to turn on or off the continuous LCD back-lighting
function.
