Macnaught FTWM120-001, Instruction Manual

Page: 9 / 20

TECHNICAL DETAILS
OPERATING CONDITIONS
ENVIRONMENTAL CONDITIONS
1. TEMPERATURE: min. -20°C / max. +60°C.
2. RELATIVE HUMIDITY: max. 90%.
The temperature limits shown apply to the pump components and must be respected to
avoid possible damage or malfunction.
ELECTRICAL POWER SUPPLY
1. Depending on the model, the pump must be supplied by a single-phase alternating current
line whose nominal values are shown in the table in Paragraph C1 – ELECTRICAL
SPECIFICATIONS.
2. The maximum acceptable variations from the electrical parameters are:
- Voltage: +/-5% of the nominal value
- Frequency: +/-2% of the nominal value
Power from lines with values outside the indicated limits can damage the electrical
components.
WORKING CYCLE
The pumps are designed for continuous use under maximum back pressure.
Functioning under by-pass conditions is only allowed for brief periods of time (2-3min-
utes maximum).
FLUIDS PERMITTED / FLUIDS NOT PERMITTED
PERMITTED
1. DIESEL FUEL at a VISCOSITY from 2 to 5.35 cSt (at a temperature of 37.8°C) .
2. Minimum Flash point (PM): 55°C.
NOT PERMITTED
Item No.
17310801
17311000
17311200
17330900
17331200
Current
AC
AC
AC
AC
AC
Voltage(V)
230
230
230
120
120
Frequency
50/60Hz
50/60Hz
50/60Hz
60Hz
60Hz
80LPM
100LPM
120LPM
25GPM
32GPM
450W
750W
1100W
450W
1200W
1"
1"
1"
1"
1"
Nominal (*)
POWER
Inlet/outlet
Connection
Flow Rate
ELECTRICAL POWER
Description
Gasoline
Inflammable Liquids With Pm<55°C
Liquids With Viscosity>20cst
Water
Food Liquids
Corrosive Chemical Products
Solvents
Related Dangers
Fire – Explosion
Fire – Explosion
Motor Overload
Pump Oxidation
Contamination Of The Same
Pump Corrosion, Injury To Persons
Fire – Explosion, Damage To Gasket Seals
E7