995562 – Revision A
Page
14
of
21
7.6 – Rear Castors
Within this section it will explain the correct procedure on removing and reinstalling the
Rear Castors for servicing procedures or replacement. The below instructions are relevant to
all four Castors.
Removal
Step 1 – Remove the Foot Tray from the product. (Refer to section 7.4)
Step 2 - Place the Transfer Aid on its side for easier service.
Step 3 – Using a 17mm Ratchet Spanner and a 6mm Allen Key, remove the nut and bolt from
the castor to release.
Step 4 – Remove the Castor from the bolt.
Refitting / Replacement
Step 5 - Refitting is a reversal of the removal process noting the following point:
A)
Ensure that the bolt is fully secured once tightened while ensuring the Castor is able
to spin freely.
B)
Ensure the Washer is fitted on the underside of the Castor.
