995562 – Revision A
Page
11
of
21
7.3 – Knee Pad
In this section it will explain the correct procedure on removing and reinstalling the Knee
Pad for servicing procedures or replacement.
Removal
Step 1 – Remove the Bolts and washers on both sides using a 6mm Allen Key.
Step 2 – Knee Pad will be released and can be removed.
Step 3 – (Where applicable) – Use a 3mm Allen Key to remove the Grub screw and slide off
the Knee Pad holder.
Refitting / Replacement
Step 4 - Refitting is a reversal of the removal process noting the following points:
A)
Ensure that the Knee Pad is fitted in the correct orientation as shown in the image.
