995565 – Revision A
Page 29 of 38
B)
Ensure all parts are placed in the correct order when attaching the Leg Pivot Plate,
this includes: Bolt, Spacer, Black Washer, White Washer, Leg Pivot Plate, and White
Washer.
C)
Apply Loctite 243 to the Leg Pivot Plate Bolt.
D)
Ensure the washer is included between the Nut and Actuator when attaching the
Actuator to the Base Pivot Point.
E)
Apply/Reapply Silicone Grease to the Leg Lever Pin and the Pivoting Boss.
9.9 – Front Castor
Within this section it will explain the correct procedure on removing and reinstalling the
Front Castor for servicing procedures or replacement.
Removal
Step 1 – Remove the Foot Tray from the Base. (Refer to section 9.12)
Step 2 - Place the Stand Aid in its side for easier service – Gently rest the Stand Aid on its
side to avoid damage such as paint scratching.
Step 3 – To release the Front Castor, place a 6mm Allen Key into the countersunk bolt and
use a 17mm Ratchet Spanner on the underside of the Castor as shown and loosen.
Refitting / Replacement
Step 4 - Refitting is a reversal of the removal process noting the following point:
A)
Reattach the Castor parts in the correct order: Nut, Washer, Castor, leg and Bolt.
B)
Ensure that the Castor is secured tightly, there should be no play after fastening.
C)
Ensure the Castor rotates freely.
