995064 – Revision A
Page 29 of 36
9.11 – Leg – (LH Leg and RH Leg)
Within this section it will explain the correct procedure on removing and reinstalling the legs of the
hoist, images refer to one leg only but same applies to both.
Removal
Step 1 – Remove the Foot Tray from the Base. (Refer to section 9.12)
Step 2 - Place the Stand Aid in its side for easier service – Gently rest the Stand Aid on its
side to avoid damage such as paint scratching.
Step 3 – Remove the Leg Rod Assembly. (Refer to section 9.7)
Step 4 - Remove the Front Castors. (Refer to section 9.9)
Step 5 – Using two 5mm Allen Keys, remove one of the screws from the Threaded Pin.
Step 6 – Once one of the screws are removed, the Pin can be pulled out to release the Leg.
Step 7 – Remove the Leg from the Frame.
Refitting / Replacement
Step 8 - Refitting is a reversal of the removal process noting the following points:
A)
Apple Loctite to the screws when refitting.
B)
Ensure the Leg is attached in the correct orientation, Castor will be facing the floor.
