Owner
’s Manual
13
Owner’s Manual
12. Fan On / Off
One of our favorite things about the Thump Series
is the Summer cool-off / Winter warm-up feature.
Is it hotter than the blazes out where you are?
We’ve got you covered!
Simply press this switch to turn the fan on and off.
The speaker begins acting like a fan, blowing out cool
air!
The LED will illuminate green when engaged (fan on).
13. Fan Speed
Want more? Of course you do! Here you’re able to
select the speed setting of the fan from 1 (the lowest
setting) to 5 (the highest setting).
Quickly press this button to what setting you
would like, up to five times. The LED will flash green
the number of the current setting.
14. Mist Level
A rotating fan with multiple speeds is a nice feature,
but when a mister is thrown in...? Oh, all bets are off!
When the mist level switch is engaged, a light spray
of water is dispersed to keep the band and crowd nice
and refreshed throughout the performance. The LED
will illuminate green when engaged (mist on).
FAN
SPEED
MIST
LEVEL
FAN
ON / OFF
HEAT
ON / OFF
HEAT
LEVEL
ROTATE
12
15
13
16
14
17
15. Heat On / Off
The fan feature is nice... but what if it’s 40˚ below with
20 feet of snow outside and a wind chill factor of the
frozen tundra? Yeah, we’ve got you covered there, too!
The built-in heater is great, especially when in the
monitor position. Gotta love warm tootsies! Just like
with the fan, simply press this switch to turn the heat
on and off. The LED will illuminate green when engaged
(heat on).
16. Heat Level
If the temperature is the aforementioned “frigid”,
we’re pretty confident that you’re going to want
to crank the heat... perhaps not, but we’d bet on it!
This works similarly to that of the fan speed
with settings ranging from 1 (low heat) to 5
(cranked heat). Quickly press this button to what
setting you would like, up to five times. The LED
will flash green the number of the current setting.
17. Rotate
Last, but absolutely not least... the fan AND heater are
both rotatable (although the one switch controls which-
ever one is engaged, of course).
The rotation speed may be set to 1 (low), 2 (medium),
or 3 (high). As with the fan speed and heat level,
quickly press this button to what setting you would
like, up to three times. The LED will flash green
the number of the current setting.
Please note that the rotation function only
works when the loudspeaker is mounted
on the T100 tripod or SPM400 pole mount.
Operators are standing by!
Thump Series Loudspeakers: Rear Panel Features continued...
