Mackie THUMP 212, Owner'S Manual

Page: 9 / 21

Owner
’s Manual
9
Owner’s Manual
Large Club System
SIG/OL
FRONT LED PHASE
FR OUTPUT
U
+6dB -6dB 160Hz 80Hz
120Hz
INPUT HIGH PASS OUT FULL RANGE OUT
NORMAL
INVERT
FLAT
DEEP
PUNCH
VARIABLE ON
OFF
STEREO
MONO
A
HIGH PASS MODE
A
B B
SIG/OL
FRONT LED PHASE
FR OUTPUT U
+6dB -6dB 160Hz 80Hz
120Hz
INPUT HIGH PASS
OUT
FULL RANGE
OUT
NORMAL INVERT
FLAT
DEEP
PUNCH
VARIABLE
ON OFF
STEREO MONO
A
HIGH PASS MODE
A
B B
SIG/OL
FRONT LED PHASE
FR OUTPUT
U
+6dB -6dB 160Hz 80Hz
120Hz
INPUT HIGH PASS
OUT
FULL RANGE
OUT
NORMAL
INVERT
FLAT
DEEP
PUNCH
VARIABLE
ON
OFF
STEREO
MONO
A
HIGH PASS MODE
A
B B
SIG/OL
FRONT LED PHASE
FR OUTPUT U
+6dB -6dB 160Hz 80Hz
120Hz
INPUT HIGH PASS
OUT
FULL RANGE
OUT
NORMAL
INVERT
FLAT
DEEP
PUNCH
VARIABLE ON
OFF
STEREO
MONO
A
HIGH PASS MODE
A
B B
DUCKING FB ELIMINATOR OVERLOAD
CH1 CH2 MAIN
THRU
LINE
MIC
LINE
U U
MAX
LINE MIC
U
MAX ∞ - ∞ MAX - ∞
GAIN VOLUME GAIN
DUCKING FB ELIMINATOR OVERLOAD
CH1 CH2 MAIN
THRU
LINE
MIC
LINE
U U
MAX
LINE MIC
U
MAX ∞ - ∞ MAX - ∞
GAIN VOLUME GAIN
Hookup Diagrams continued…
Here’s how to set up a large club system. In this example, the L/R outputs of a DL16S mixer are connected directly
to the channel A inputs of a pair of Thump118S subwoofers. The Full Range Out of each subwoofer is then connected
to the inputs of an additional pair of Thump118S subwoofers.
From here, the High Pass Out of the two outer Thump118S subwoofers are connected directly to the inputs
of a set of Thump215 loudspeakers. Then set the subwoofer’s High Pass Mode to Deep. Talk about beefy low end!
Outputs 1 and 2 from the mixer may be used as aux sends; these are connected directly to the channel 1 inputs of a pair
of Thump215 loudspeakers to be used as monitors for the band. The gain knob on all Thump loudspeakers in this example
should be set to Line. Lastly, all Mic/Line switches should be disengaged [Line]. Keep in mind that these “MIC” and “LINE”
markings are for reference only and may need to be raised or lowered.