48
ULTRA MUTE SUMMARY
SYSTEM BYPASS
• Turns off
ULTRA MUTE
. Disables all
automation, including all MIDI commands
received through the
MIDI
or
DATA
ports.
Note:
Sysex messages are still recognized
while in Bypass mode. A Sysex data move
does not affect the console’s current mute
status.
MUTE PREVIEW
• In Group or Snapshot Mode, allows viewing
the mute configuration of programmed
Snapshots or Groups without engaging
them. Press
DO IT
to engage a previewed
Snapshot or Group.
• Press
MUTE PREVIEW
again to exit
Preview Mode.
GENERAL
• There are 9 Sets of 10 Groups each, for a
total of 90 Groups. Up to 10 Groups can be
active at a time within a Set.
• There are 100 Snapshots (00-99). Only one
Snapshot can be active at a time.
• Snapshot 00 is loaded into the console
when it is first powered up. Factory default
is all mutes off.
MODE
• Toggles between Group Mode and Snapshot
Mode.
• When going from Group Mode to Snapshot
Mode, you should press
DO IT
to engage
the Snapshot in the Numeric Display.
• When going from Snapshot to Group Mode,
you must press
CLEAR
for two seconds to
clear the Snapshot’s mute configuration
from the board. Then select the Group you
want to engage using the 0-9 buttons.
ARROW UP/DOWN BUTTONS
• In Group Mode, increments and decre-
ments the Set Number in the Numeric
Display (all Groups must be OFF).
• In Snapshot Mode, increments and decre-
ments Snapshots in the Numeric Display.
• In Snapshot Mode, press and hold the
CLEAR
and Arrow Up buttons to enter
Auto-Increment (Load-and-Go) mode.
Then press
DO IT
to engage consecutively
increasing Snapshots.
• Press and hold the
CLEAR
and Arrow Down
buttons to exit Auto-Increment mode.
To create a Group:
1. Press the
MODE
switch to enter Group
mode (one digit lights in the numeric
display).
2. Select the Set in which to store the Group
by pressing the Arrow Up/Down buttons.
3. Activate all the mute switches you wish to
store in the Group.
4. Press
STORE
.
5. Press a number button
0-9
to select the
Group in which to store the current mute
configuration.
