Onyx P
remium Analog Mix
er with Multi-
Tr
ack USB
Onyx Premium Analog Mixer with Multi-Track USB
28
Flanger Parameters and Values
The rate (Hz) and depth (ms) determine
how many cycles per second the chosen
effect oscillates. However, the rate and depth
of Chorus 1, Chorus 2 and Flanger is expressed
as 0.1x Hz / ms which translates the value that
the processor utilizes. An easy way to understand
the value is to take the number below the virtual knob
and “move” the decimal one point to the left (or multiply
by 0.1). For example, if rate is displayed as 37, then
it's really 3.7 Hz.
Lastly, onto the final three multi-purpose effects
(Delay + Reverb, Delay + Chorus and Chorus).
Time
– This knob sets the current delay time
in milliseconds, from 20 ms to 1000 ms.
Rate
– This knob sets the speed of the modulation.
The range will vary depending on the effect chosen.
Depth
– This knob sets the depth of the delay
modulation. The range will vary depending on
the effect chosen.
Decay
– This knob represents the decay time
of the reverb, ranging from 0 to 60.
Size
– This knob represents the amount of desired
reverb (or “the size of the room”), ranging from 0
(no reverb) to 15 (max reverb).
Parameter Low Value High Value Default Increments
Rate
0
100
10
±1
Depth
10
150
62
±1
Blend
0
100
100
±1
EQ
Frequency
400 Hz
16.0 kHz
7.6 kHz
Variable
Width (Q)
0.5
3.0
2.0
±0.1
Gain
-8 dB
+8 dB
-1 dB
±1 dB
LPF
6.0 kHz
18.0 kHz
18.0 kHz ±0.1-0.2 kHz
HPF
80 Hz
600 Hz
90 Hz
±1-10 Hz
EQ
PRESETS
RATE DEPTH
TIME
DELAY + CHORUS
FX
500
50
39
Delay + Reverb Parameters and Values
Delay + Chorus Parameters and Values
Chorus Parameters and Values
The rate (Hz) and depth (ms) determine
how many cycles per second the chosen
effect oscillates. However, the rate and depth
of the two chorus modulation effects is expressed
as 0.1x Hz / ms which translates the value that
the processor utilizes. An easy way to understand
the value is to take the number below the virtual knob
and “move” the decimal one point to the left (or multiply
by 0.1). For example, if rate is displayed as 37, then
it's really 3.7 Hz.
Parameter Low Value High Value Default Increments
Time
20 ms
1000 ms
196 ms
±9-10 ms
Rate
16
73
26
±1
Depth
0
100
8
±1
EQ
Frequency
400 Hz
16.0 kHz
6.8 kHz
Variable
Width (Q)
0.5
3.0
2.1
±0.1
Gain
-8 dB
+8 dB
+2 dB
±1 dB
LPF
6.0 kHz
18.0 kHz
12.6 kHz ±0.1-0.2 kHz
HPF
80 Hz
600 Hz
88 Hz
±1-10 Hz
Parameter Low Value High Value Default Increments
Time
20 ms
1000 ms
196 ms
±9-10 ms
Rate
0
100
12
±1
Depth
16
63
40
±1
EQ
Frequency
400 Hz
16.0 kHz
1.0 kHz
Variable
Width (Q)
0.5
3.0
2.0
±0.1
Gain
-8 dB
+8 dB
±0 dB
±1 dB
LPF
6.0 kHz
18.0 kHz
6.0 kHz
±0.1-0.2 kHz
HPF
80 Hz
600 Hz
80 Hz
±1-10 Hz
Parameter Low Value High Value Default Increments
Decay
0
60
10
±1
Size
0
15
6
±1
Rate
0
54
33
±1
EQ
Frequency
400 Hz
16.0 kHz
415 Hz
Variable
Width (Q)
0.5
3.0
2.0
±0.1
Gain
-8 dB
+8 dB
-5 dB
±1 dB
LPF
6.0 kHz
18.0 kHz
10.0 kHz ±0.1-0.2 kHz
HPF
80 Hz
600 Hz
108 Hz
±1-10 Hz
