background image

1

Owner’s Manual

Owner’

s Manual

Channel Level LED (Sensitivity)

 

0 LED = 0 dBu (normal operating level)

VU Meters

Main and Solo Left and Right, 12 segments:  
 

Clip (+20), +10, +7, +4, +2, 0, –2, –4, –7, –10, –20, –30 

 

0 LED = 0 dBu

AC Power Requirements

Power Consumption: 
 

Onyx 2480 

180 watts 

 

Onyx 3280 

200 watts 

 

Onyx 4080 

220 watts 

 

Onyx 4880 

240 watts

Universal AC Power Supply: 
 

100 VAC – 240 VAC, 50-60 Hz

Physical Dimensions and Weight

Onyx 2480

 

Height:   

9.4 in/239 mm  

Width:   

48.8 in/1240 mm 

Depth:   

29.6 in/751 mm 

Weight:   

95 lb/43 kg

Onyx 3280 

Height:   

9.4 in/239 mm  

Width:   

60.0 in/1523 mm 

Depth:   

29.6 in/751 mm 

Weight:   

113 lb/51 kg

Onyx 4080 

Height:   

9.4 in/239 mm  

Width:   

70.4 in/1788 mm 

Depth:   

29.6 in/751 mm 

Weight:   

131 lb/59 kg

Onyx 4880 

Height:   

9.4 in/239 mm 

Width:   

81.3 in/2065 mm 

Depth:   

29.6 in/751 mm 

Weight:   

149 lb/68 kg

Options

Onyx PS External Redundant Power Supply 

LOUD Technologies Inc. is always striving to improve our prod-
ucts by incorporating new and improved materials, components, 
and manufacturing methods. Therefore, we reserve the right to 
change these specifications at any time without notice.
“Mackie.”, “Onyx,” and the “Running Man” are registered 
trademarks of LOUD Technologies Inc. All other brand names 
mentioned are trademarks or registered trademarks of their 
respective holders, and are hereby acknowledged.
©2005-2008 LOUD Technologies Inc. All Rights Reserved.

Summary of Contents for Onyx 80 series





































Reviews: