Owner's Manual
9
Post-Production System
This diagram shows a voice-over microphone connected to the channel 1 mic input, a video deck's
audio output connected to channels 9-10, with its audio inputs receiving the main mix from the
1/4" outputs. A synthesizer is connected to channel 11-12, and an electronic drum kit connected to
channel 13-14.
An effects processor and a sampler each receive a mono input from an aux send (
post-fader
), and
their stereo outputs connect to the respective stereo return inputs. A keyboard controller is attached to the
sampler. Headphones are used to monitor all levels, using a headphone amp with multiple headphones,
including one in the voice-over booth.
A pair of Mackie HR824mkII powered reference monitors are connected to the left and right control
room outputs for careful and accurate monitoring in the control room.
A desktop Mac or PC is connected to a FireWire port, allowing the 2-channel main mix to be recorded
and two channels to be played back. Two cinema screens are connected to the desktop, one displaying
audio and the second for video. A RAID rack is attached to the computer for mass storage. A recorder is
connected to the main outs, and utilized as the master recorder.
SOLO
SOLO
SOLO
SOLO
SOLO
SOLO
SOLO
SOLO
SOLO
SOLO
SOLO
SOLO
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
Headphones
Headphone Amp
Voice-over
Microphone
Voice-over booth
Synthesizer
Electronic
Drum Kit
Effects Processor
Effects/ Sampler
Mackie
HR824mkII
Powered
Reference
Monitors for
Control Room
Desktop
Mac or PC
Keyboard Controller
Cinema Display for Audio
Cinema Display for Video
RAID rack
Video Deck
record
play
Recorder
press FW button ( ) to send
FW 1-2 computer output into
mixer channels 15-16
press FW button ( )
to send main mix to computer
via FireWire channels 15 and 16
Set Aux 1 & 2 POST for
for external processors
