Mackie Onyx 1200F Owner'S Manual Download Page 35

35

Owner’s Manual

Owner’

s Manual

Input Impedance

Mic Input: 

2.4 k

Ω

 balanced 

Inst Input: 

1 M

Ω

 

 

Line:  

 

30 k

Ω

 balanced, 15 k

Ω

 unbalanced

Output Impedance

Line:  

 

150

Ω

 balanced

Signal Level LEDs

 

–40 dB, –20 dB, –10 dB (normal operating level),  

 

OL = 22 dBu

Sample Frequency Selections

 

44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,  

 

176.4 kHz, 192 kHz

Analog Input Connectors

 

12 balanced XLR/TRS mic/line inputs 

 

Two unbalanced 1/4" TS line/high-impedance  

 

instrument inputs 

 

One balanced XLR talkback mic input 

 

Two balanced 1/4" TRS line-level insert returns

Analog Output Connectors

 

Eight balanced line-level outputs on DB-25 

 

Four balanced 1/4" TRS control room line-level outputs 

 

Four unbalanced 1/4" TRS stereo headphone outputs 

 

Two balanced 1/4" TRS line-level insert sends

Digital Input Connectors

 

One BNC connector for external word clock input 

 

One RCA connector for S/PDIF input 

 

One XLR-F connector for AES/EBU input 

 

Two 5-pin DIN connectors for MIDI input 

 

Two Toslink optical connectors for ADAT input 

 

Two 6-pin FireWire input/output

Digital Output Connectors

 

One BNC connector for external word clock output 

 

One RCA connector for S/PDIF output 

 

One XLR-M connector for AES/EBU output 

 

Two 5-pin DIN connectors for MIDI output 

 

Two Toslink optical connectors for ADAT output

DSP

TMS320C6713 Floating-Point Digital Signal Processor  
 

operating at 225 MHz, delivering up to 1350 million  

 

floating-point operations per second (MFLOPS),  

 

1800 million instructions per second (MIPS), and  

 

450 million multiply-accumulate operations per  

 

second (MMACS)

AC Power Requirements

Power Consumption: 45 watts
Universal AC Power Supply: 
 

100 VAC – 240 VAC, 50-60 Hz

Physical Dimensions and Weight

Height:   

3.50 in/89 mm 

Width:   

17.5 in/445 mm (main body of unit) 

 

 

19.0 in/483 mm (with rack ears) 

Depth:   

14.5 in/368 mm (including front knobs and  

 

 

rear BNC jack) 

Weight:   

13.8 lb/6.3 kg

LOUD Technologies Inc. is always striving to improve our prod-
ucts by incorporating new and improved materials, components, 
and manufacturing methods. Therefore, we reserve the right to 
change these specifications at any time without notice.
“Mackie.”, “Onyx,” and the “Running Man” are registered 
trademarks of LOUD Technologies Inc. All other brand names 
mentioned are trademarks or registered trademarks of their 
respective holders, and are hereby acknowledged.
©2007-2012 LOUD Technologies Inc. All Rights Reserved.

10 

11 

12 

14.5 in/368 mm

13.0 in/330 mm

3.5 in/ 

 

89 mm 

(2 r

ack spaces)

 

19.0 in/483 mm 

17.5 in/445 mm

WEIGHT

13.8 lb/

6.3 kg

Summary of Contents for Onyx 1200F









































Reviews: