DC16 Owner’s Manual
36
The VCAs work somewhat similarly to that of the subs. Let’s see how! Push the page down button
to display the VCAs. The customizations in this example are naming and coloring. [VCAs cannot
be linked]. VCA1 retains the same default green color, but was renamed to “Guitar”. The color of
VCA2, though, was changed from its default
green
to
orange
. Additionally, it was renamed to “Horns”.
Lastly, the color of VCA3 was changed from its default
green
to a
pinkish-red
. Additionally, it was
renamed to “Perc”.
The mix selector LEDs change to the color of the selected output, letting you know that the channel
faders now control the level of that input to the selected output. As such, the master fader now controls
the level of the selected output. It’s the highlighted VCA3 Perc in this example.
When a VCA is selected, only the input channels that are controlled by the selected VCA are displayed.
If no channels have been assigned to a VCA – VCA4-VCA6 in this example – then no channels will be
displayed.
VCA1
VCA5
VCA3
N/A
VCA2
VCA6
VCA4
N/A
VCA3
VCA1
VCA2
Guitar
Horns
Perc
VCA4
VCA5
VCA6
VCA3
VCA1
VCA2
VCA4
VCA5
VCA6
Master Fader
DC16: VCAs [Page 5]
Default
Default
Customized