background image

Combinator 

The first four rotary encoders and Select buttons are mapped to the Combinator 
controls. Record button 4 controls the Run Pattern Devices button. 

Subtractor 

There are two keyboard shortcut variations, "Filter" and "Amp & Osc". 

Redrum 

Use the Select 8 button to select which drum channels should be controlled (1-7 
or 8-10).  
 
The Mute, Solo and Select buttons can either control pattern and bank selection 
or serve as mute, solo and audition buttons for the drum sounds. This is selected 
using keyboard shortcut variations. 
 
The rotaries can either control drum pitch or length, depending on the selected 
keyboard shortcut variation. In “length” mode, the rotary buttons switch between 
decay/gate mode for the drum sounds. 
 
Record button 4 is always mapped to the Run button. 

Malström 

There are three keyboard shortcut variations, “Filter”, “Osc/Mod A” and 
“Osc/Mod B”. 

NN19 

There are two keyboard shortcut variations, “Filter&LFO” and “Osc”. 

BV-512 Vocoder 

The faders control the band levels - use keyboard shortcut variations to select 
which vocoder bands to control. 

Matrix 

Solo 1-4 and Mute 1-4 control pattern selection; Select 1-4 control bank 
selection. 
 
Record button 4 controls the Run button. 

Summary of Contents for C4 Commander











Reviews: