Left/Right buttons. In EQ mode, the second row of rotary buttons is mapped to
the EQ on/off switches. In Aux Send 3-4 mode, the second row of rotary buttons
is mapped to the Aux Send 4 Pre Fader switches.
Line Mixer 6:2
The lowest row of rotaries controls channel levels, with the rotary buttons serving
as Solo buttons. The Master Level is on the rotary in the lower right corner.
The second lowest row of rotaries controls channel pan settings, with the rotary
buttons serving as Mute buttons.
The second highest row of rotaries controls the Aux Send settings. The Aux
Return Level is on the rotary farthest to the right in this row, with the rotary button
controlling the Aux Pre/Post switch.
Subtractor
The two lowest rows of rotaries control filter settings and the amp envelope.
The two upper rows of rotaries either control oscillator settings or LFO/Mod
envelope settings. To switch between these modes, use the Parameter (Single)
Left/Right buttons.
Malström
The two lowest rows of rotaries control filter, shaper and master settings.
The two upper rows of rotaries will either control Oscillator A settings, Oscillator
B settings or Modulator Settings. To step between these modes, use the
Parameter (Single) Left/Right buttons.
Redrum
Each column of rotaries corresponds to a drum sound channel on the Redrum.
The Bank Left/Right buttons determine which channels are controlled (drum 1-7
or drum 8-10).
The lowest row of rotaries controls drum channel levels, with the rotary buttons
serving as Solo buttons. The Master Level is on the rotary in the lower right
corner.
The second lowest row of rotaries controls drum channel pan settings, with the
rotary buttons serving as Mute buttons. The Run button is controlled by the
rightmost rotary button in this row.
There are two modes for the rotaries and rotary buttons in the two upper rows:
In "Pattern mode", the top row buttons select pattern and the first buttons in the
second row select bank.
In "Parameter mode", the rotaries control drum pitch and length, top row buttons
trigger the drum sounds and the buttons in the second row control the
Decay/Gate switches.
To change mode, use the Parameter (Single) Left/Right buttons.
BV-512 Vocoder
The rotaries in the lowest row control the basic vocoder parameters.
