![background image](http://html1.mh-extra.com/html/mack/granite-gu-series/granite-gu-series_operators-handbook-manual_686197267.webp)
256 Mack, EPA2010 Emissions Solution
DANGER
During the regeneration process, the temperature of the exhaust gases will be
elevated. DO NOT park or stop for an extended period under low hanging
overhead flammable objects such as trees, awnings, structures, etc., that could
be damaged by elevated exhaust temperatures. Further, if the vehicle is being
operated in an area where flammable vapors exist, the regeneration process must
be interrupted. Failure to heed these cautions may result in fire or explosion
causing serious personal injury or death.
Note:
Do not initiate a parked regeneration if the vehicle is in a location that may be
hazardous (i.e., in close proximity to flammable materials or gases),
If a parked regeneration is stopped by the vehicle operator, it should be initiated at a
later time when the vehicle is in a safe location. However, if a parked regeneration is
stopped too many times, the vehicle must be taken to a MACK service facility. The
service facility will use a service tool to manually initiate the regeneration.
WARNING
The temperature of the exhaust system components during the regeneration
process 350 degrees C (660 F). The exhaust gas leaving the system can reach
505 degrees C (930 F). Various factors (including ambient temperature and
duration of the regeneration process) determine when these components will
return to normal operating temperature after regeneration has completed.
Be extremely careful around these hot components. Contact with these
components can result in serious personal injury.
CAUTION
When the inhibit position is pressed, the switch will remain in a locked position. It
is important, therefore, to immediately set the switch back to the neutral position
when safe to do so. Failure to set the switch back to the neutral position may result
in an engine derate, clogged diesel particulate filter or damage to the filter.
Summary of Contents for Granite GU Series
