Macherey-Nagel NANOCOLOR VIS II, Quick Start Manual

Page: 27 / 33

27 Quickstart guide NANOCOLOR ®
UV
/
VIS
II / VIS II V 1.02 / 08.15
6.5 Test number
1 2 3
4 5 6
7 8 9
The spectrophotometer provides the possibility to call up preprogrammed or
user defined tests via the test number. After selecting the menu through
1 2 3
4 5 6
7 8 9
, the
test’s number can be inserted via the numeric keypad (for example: insert 044
for the NANOCOLOR ® Hardness Ca / Mg test).
If the number is correct, information about the test will appear on the display. Confirming
with will open the measurement window. Dependent on the method, the sample can
now be measured directly or against a zero solution.
UV/VIS II
Open Mode, 28.10.2014, 10:57
0
7
4
1
C
8
5
2
9
6
3
Test Number
OK
0444
0444 Hardness Ca / Mg
1.0 - 25.0 °e
540 nm
Fig. 20: Inserting the test number